16 minute read

Lady searching with a microscope
Source: Undraw by Katerina Limpitsouni

Sometime back, I started a twitter thread, capturing some musings about Software testing and test automation.

Most of these were boring, common sense facts about Software testing practices and have been spoken or blogged about heavily. For me, It was fun to do a mind dump of these mental models as the act of writing stuff down really helps me crystallize ideas for myself

Some people liked this thread asked if there was a blog post about this somewhere. Sadly there was none at that time.

Hence the reason for this blog. So here we go.

Let’s do this. 💪

I’ll post each tweet and explain or give some additional context about them. Hopefully you’ll find them useful.

Disclaimer: As an experienced engineer these might be really obvious to you. But a refresher has never hurt anyone has it? 🤷

1. Early involvement

Really good Testers possess lots of business context, when you involve them early in the design process, they can help spot gaps in your specs, missed corner/edge cases and Consumer perspective. You as a PM/Dev Lead can capture all these very early in the process.

In the end the product is better off and this also helps reduce late spec missed during actual testing phase, at which point its very expensive to redo design to accommodate flows that were not initially considered

💡 Testers: If you find yourself being left out because, “Well, Dev’s and PM’s are busy in the design process”, Don’t sulk, raise your hand up and self invite yourself, doing enough of this shows you are willing to be a stakeholder and take ownership and in most cases, you’ll be included right away. Makes sense?

2. Shift left

We spoke about early involvement in Tweet # 1

With automated tests, Why should testers have all the fun? 🤷

If you believe in QA as being the gatekeeper and only person responsible for quality/automation, please read on a related post: Testers are not the last line of defence

Testing is a team sport, and dev and test are really two sides of the same coin

Devs should also be comfortable with the automation code and be able to add new coverage or modify existing cases as needed. Most Developers that I know of, are more than happy in helping out, You as the tester just need to help them out with the required context

Another side benefit of this is that Testers get more bandwidth to create robust automation.

Win. Win. 🙌

3. Don’t run automated cases manually

Some exploratory testers lack confidence in automation, and are skeptical if the automated test will cover everything? They would often repeat the same cases by hand.

It’s a fair question, but can be easily answered if the said Tester can grok the automation codebase and find if the required assertions are in place.

To me, repeating cases by hand is just wasted effort and diminishes the value proposition of automation. We should strive to build robust automation and use the freed up time to test different aspects of our system.

4. Build automation early

I wrote about this in an earlier post, but you should strive to write some automation early and put it in your CI system, this way you can very quickly run this suite to gain confidence about your system.

Nobody likes to run same cases every hour for every new dev build is it?

Its much better to automate these and get them off your plate. Interested in reading more about this? Read: Why you should automate tests early

5. Exploratory over scripted tests

Manual exploratory testing is really valuable, it involves someone using their mind, creativity, prior context about the product to explore, break down the product from different angles and often finds very hard to discover bugs.

However, If you ask your testers to run the same scripted tests in every cycle, Do you think, they will take the uncommon sad path?

In most cases, the answer would be no, Not our of lack of interest but because they won’t have enough time

so we should rather automate these predictable cases and unleash our testers to explore the product.

Note: Exploratory testing is not random testing with no aim, it is well structured and involves use of well defined tours or charters to cover a meaningful subset of the product. You can read more about it in amazing books like Explore it! by Elisabeth Hendrickson or Exploratory software testing by James Whittaker

6. Automate the boring stuff

Quite obvious,

  • Don’t repeat same n cases manually in a loop, rather automate them.
  • Do you have to create some test data manually again and again, write an automated script
  • Does some test take a lot of time and is painful to repeat, well you know what to do 😉

If its boring and repetitive and does not require human intuition, automate it please 🙏

7. Start small and Iterate

I’ve learned from experience that doing Big design upfront (BDUF), Writing really long documents often, does not lead to good frameworks or tests.

Obviously this might not hold true in every single context, but its better to start small and then quickly iterate. If you have to fail, you’ll fail early and discover problems early as well.

Remember refactoring is your friend here. 🤝

This does not mean you throw all design docs out of the window, Do enough design to form a high level idea, maybe a block diagram or two but don’t really go deep into each component at this stage.

Let the code surface low level implementation details and then pivot appropriately.

8. Respect test pyramid

We are just describing the classic Test pyramid. Its a darn good idea to write the appropriate test at the required level.

And yes, you as a Test automation engineer should go deep into the product stack and understand how to write these tests. Don’t wait for permission and Don’t limit yourselves to writing only Functional E2E tests.

If you want to know more about this, read Test pyramid, The Practical Test Pyramid at Mr Martin fowlers website

9. Write atomic tests

I don’t think this needs explanation, As a rule of thumb Don’t write tests longer than 10 Lines of code. Even that is long in most contexts.

Write small tests that do one thing and assert its outcomes, your automated suite would really thank you later since debugging would be a delight and these will run fast as well.

10. Build parallelization from the start

While building a framework as soon as you have 5 sequential tests, Spend some time and make them run in parallel. You can leverage capabilities in your test runners to do this easily

It can be a bit of work initially but the payoffs really are huge.

You’ll observe them when your suite scales from 10, 100, 1000, 10000 tests. If you want to understand Java concurrency a bit more read this post on MIT OCW (MIT Open courseware)

11. Design smart coverage

This one is subtle, I’m sure you realize by now that every single test that you’ll add to your suite has a maintenance overhead.

To me this analogy seems reasonable, Imagine you are the gardener, You should treat your automated suite or tests like a garden and regularly prune them to remove any redundant unnecessary tests.

Usually writing very targeted tests that business cares most about is the smart thing to do. Ask yourself, can I write n smart tests that give me lot of coverage and confidence to release features early. If yes, those are the ones you should write first.

12. Test sad path more often

Most testers are so often busy ensuring happy path works, and they never get time to test much of sad paths.

What often gets ignored are the corner cases, on that unique Test/OS/screen size that often cause lot of customer angst.

And, that’s really really sad! 😲

Please test that more, write automation for happy paths so you get time.

13. Write hermetically sealed tests that detect changes

We already spoke about this in Tweet # 9 and 10, however let me add few more aspects that classify well written tests,

  • Never ever write tests that share some common data, because they inherently force you into a sequential suite and we don’t want that, do we?

Also Take your time and write good assertion messages, when your test assertion fail, and trust me, they will, you should have a friendly message that explains where exactly it went wrong.

Its one of the most important things to get right but often ignored, please spend time on this simple habit and trust me, the rewards would be immense

Needless to say, when you tests fail, make sure someone analyzes and reports it to appropriate developer to get it fixed.

14. Keep your suites healthy

Automated tests are not magic, we often say, this suite is so flaky, it keeps on failing all the time.

Remember: If this keeps on happening, you have failed in your automation efforts.

Be afraid, be very very afraid of this!

Don’t write new tests to show some coverage increase metric to management rather always keep your existing suite green

Every failing tests is an opportunity to explore what exactly went wrong. You either find a product bug, a problem in your test environment or a problem with your test itself. Use this opportunity to design a better test, and please don’t just re-run the test and ignore it saying it sure passed now.

15. Before automating, test it manually

Here is a silly phenomenon, we harp on automated tests as the promised savior.

It sure is fun to churn out code like a machine and automate 5 - 10 new cases per day to show an upward trending graph. Management really appreciates such an SDET right?

However, if you are doing this activity for the praises and accolades, you are digging yourself a slow deep hole.

In most cases automation for the numbers game is not really effective automation and we all fall into this trap in our careers

Rather, I propose and encourage you to understand the full context behind the feature you want to automate first and test it out once or twice by hand.

Some questions you can ask yourself:

  • Is there any value in automating this?
  • Is this better off being tested manually?
  • Do I understand this feature enough?
  • What sort of assertions should this test have?
  • Should I break this down into multiple smaller tests?

This would ensure that when you get down to writing the automation, you already have a good mental model about the feature and can write better tests.

Also, don’t forget to write documentation to help the next engineer who looks at this feature.

16. One size doesn’t fit all

This has to be the most common mistake Test Automation engineer make, Tell me if the below seems familiar?

A new SDET joins your team, after looking at the codebase they say, this code is very badly written, we need to rewrite this and build something from scratch.

Oh no 😱, Really? Yet another rewrite?

Quite often, The “shiny new framework” is a copy pasted dump of code from their last company codebase without comprehending or understanding if it really fits the need of the current team or company.

Or someone has a favorite language and for some bizarre reason wants to write everything in Java when you have ruby devs all over the company

Please stop 🛑, before you shoot yourself in the foot.

Every team, project, company is different. Joining a new team is wonderful since you can start a fresh. Take time and understand all the context before you jump in and start making suggestions.

Quite often, you’ll learn a lot more this way and also the changes you make would be constructive and not destructive in nature ☮️🍃

And, you are not alone if you’ve made this mistake. I’ve personally made this as well and learned from this. 😉

17. Asking right questions at the right time

The next time you have a project kick off meeting, don’t just sit there idly with your camera turned off and read something else or write yet another automated test.

Take an active role in the meeting, ask really good questions, this way you can ensure lot of good testing happens before even a single line of code is written. Use this oppurtunity

18. Pair with devs more often

I think Alan page described this quite well and I’ll recommend you to check out his talk on TestFlix on how to encourage devs to test more and often.

In short, pairing with devs is going to be one of the most valuable skill you’ll ever learn as a test automation engineer. Do more of it!

19. Don’t Trust “It will work, you only need to test this and that”

If you hear your devs suggest this, please ask them why they think this way and have they regression tested already?

Make sure you regression test every feature and never be satisfied with just testing the one change that was made. It can be tedious but understand that often code breaks in other integrations rather than the component that was changed directly

20. Pair some more

This one just speaks more towards tweet # 18

You need to become the Test coach of the team and help devs understand how to test, help them by building smart tools and yet again, pair more with them

21. Test automation is a Software engineering activity

Take pride in being a Software craftsmen and really care about your automation code.

Remember: Every job is a self-portrait of the person who did it. Autograph your work with excellence - Ted Key, American cartoonist and writer

That means, you code should be clean, maintainable, extendable and should scale well

Writing well factored automation code is a craft and like Software development, you need to get better at it over time.

How to get better at it, you may ask?

The good news is, there are literally tons of resources to get better at it. If you are looking for one, Look no further than Test automation university that has tons of courses created by Automation experts.

Shameless plug, I have couple of courses on it already. Check them out! Courses by automation hacks

22. Automate cases by priority and risk

Last but not least, all Testing activities should always be in the order of their impact to customers, and look at mitigating customer risk.

That means, don’t take any easy shortcuts or quick wins! Cover your business critical cases first.

Some of these Testing activities to be done in priority order could be:

  • Manually testing a product via scripted tests
  • Executing an exploratory testing tour
  • Automating a test case
  • Running automated tests

and so on!


Phew! 😌 I really gotta stop writing such mammoth posts! but this one was a long thread and deserved some explanation 🙌

None of these should come as a huge surprise to you, but I hope your find these mental models useful to you and your teams. I believe taking care of these would really result in some robust and scalable automation. WDYT?

As always, Do share this with your friends or colleagues and if you have thoughts or feedback, I’d be more than happy to chat over at twitter or comments. Until next time. Happy Testing and coding.